The ubiQuoss U9264H is a high density, high capacity, and multi-functional GE-PON FTTH Optical Line Terminal. U9264H, built on a high capacity Layer 3 switch platform, is an efficient and cost effective solution optimized for service providers to offer reliable TPS services over GE-PON network.
U9264H has total 14 slots that can accommodate 2 SCUs(Switch & Control units), 2 PSUs(Power Supply Units), 2 LIUs(Line Interface Units), and 8 PIUs(PON Interface Units). The LIU slots of U9264H can accept 8-port 1G card, 2-port 10G card, or 4-port 10G card up to 2 slot cards, meanwhile the PIU slots can accept 8-port 1.25G GE-PON up to 8 slot cards.
U9264H adapts full redundancy design of SCU and PSU to improve availability and reliability of system. On top of that, U9264H offers Layer 2 switching, Layer 3 routing, QoS, OAM, Security and IPv6 features as well.
U9264H can accommodate maximum 4096 subscribers in a typical GE-PON deployment with 1:64 splits, since it can support total 64 PON ports.
Easy and flexible deployment
19” Chassis with 8 RU Height, 14 slots
All Front Access
Non-blocking architecture
Packet processing functionalities for IP-based “Triple Play Service” delivery
960Gbps switching capacity, 10GE based next generation platform
Full Redundancy design (SCU, PSU, PIU)
Max. 64 GE-PON |
|
System Architecture
- 14 slots, 8RU, 19” mounting
- 3 FAN Module
- AC / DC Power Module(Redundancy)
Module based High Capacity L3 switching GE-PON Common Platform
- 2 slots Power Supply Unit (PSU)
- 8 slots PON Interface Unit (PIU)
- 2 slots Line Interface Unit (LIU)
- 2 slots Switch & Control Module (SCU)
Switching capacity: 960Gbps/357Mpps
Switching Fabric: 80G per slot
Subscriber capacity: 64 GE-PON Max. 4096 subscribers(1:64 splits)
All Cards and Modules support Hot-swapping
PON interface
- Max. 8 slots: up to 64 PONs
8-port GE-PON module (Up to 64 GE-PON ports, 8 slots)
Network interface
- Max. 2 slots available for below slot cards:
8-port 1GE card with 1000Base-T interface
8-port 1GE card with 1000Base-X interface
2-port 10GE card
4-port 10GE card
Fully Redundant System
- Switch & Control Card(SCU)
- AC/DC Power Supply Unit(PSU)
- Any two PON ports from any two PIU cards
Support Various SFP/XFP transceiver
Management:1-port 100Base-Tx & RS-232
IPv4 / IPv6(planned)
10Km/20Km at different splits (32) at -22dBM(Basic) or -27dBM(Optional)
S/W Upgrade without service interruption
Loop-Back Test Function
RSSI (Received Signal Strength Indicator)
- Detects (Senses) and indicates EPON signal strength by checking Rx/Tx signal of ONTs.
Automatic Laser Diode Shutdown (in case of ONT fault)
- Detects any ONT working in continuous mode and shutdown the laser diode of the ONT to prevent service failure over PON network.
|
|
Hardware
|
Product Specification |
|
Slot capacity |
14 slots |
|
Full-duplex Switching Capacity |
960Gbps |
|
System Throughput |
357 Mpps |
|
Full-duplex Capacity per slot |
80G per slot |
|
Physical Dimension |
437mm(W) x 354.4mm(H) x 295mm(D) :
19 inch Rack Mount, 8 RU height |
|
Chassis per rack |
4 chassis(2200mm : 45RU) |
|
Electrical specifications (AC/DC) |
|
Total power Consumption |
Max. 800W |
|
Rated input voltage |
210~240VAC(47~63Hz), -48VDC |
|
Environmental conditions |
|
Temperature |
-20 ~ 60°C |
|
Humidity |
90% |
|
Management Interfaces |
RS-232C, 10/100 Base-T |
Software
|
Features |
Description |
|
PON Features |
Max 4 bidirectional unicast LLID per ONU
Max 256 bidirectional unicast LLID per OLT port
Wire speed processing
1.25 Gbps upstream/downstream rate
128-bit Advanced Encryption Standard (AES) encryption engine for PON security and privacy with up to 128 unique keys
Forward Error Correction(FEC) encoding and decoding
Flexible optical transceiver interface for multiple vendor support
Hardware-based configurable Dynamic Bandwidth Allocation (DBA)
IEEE 802.1D bridging: 8K MAC Address learning and aging on local interface
IEEE 802.1p with four priority queues
IEEE 802.1Q VLAN mapping
Supports Local and Remote Loop-back test |
|
L2 Features |
Max 32K Mac Address Table
Limiting No. of MAC Address per Subscriber
Enable/Disable MAC Learning
Configurable Learned MAC aging time
Max 4K VLANs, 802.1Q Support
Private VLAN
802.1ad Q-in-Q
Tagging/Stacking
Port to VLAN Mapping
Service to VLAN Mapping
802.3ad Link Aggregation
Load-balancing based on source and destination MAC/IP
802.1d Spanning Tree Protocol(STP)
802.1w Rapid STP(RSTP)
802.1s Multiple STP(MSTP)
Rapid Per VLAN Spanning Tree Plus(RPVST+)
IGMP v1/v2/v3, snooping
Max 4K Group Support
Static Mac Address
Ethernet Jumbo Frame
Port Mirroring |
|
L3 Features |
Static Routing
RIPv2(IPv4)
RIPng(IPv6)
OSPFv2(IPv4)/v3(IPv6)
BGP4(IPv4)/4+(IPv6)
VRRPv2(IPv4)/v3(IPv6)
PBR(Policy Based Routing)
ECMP Max 8 Routes
Max 12K Routing Entries
PIM-SM
PIM-SSM
IGMP v2/v3
IGMP Proxy
Max 1K Group Support
IGMP snooping
IGMP Join/Leave
PIM-ECMP Support
IGMP Join Filter/Count Limit
DHCP Server/Relay
Blocks illegal IP users
DHCP option82
DHCP Snooping
DAI(Dynamic ARP Inspection) |
|
QoS Features |
DBA(Dynamic Bandwidth Allocation)
Support LLID for GEPON
Layer 2: Source/Destination MAC Address, VLAN ID, 802.1p Field
Layer 3: Source/Destination IP Address, DSCP
Layer 4: Source/Destination TCP/UDP Port
Flow Classification through CoS, VLAN CoS
Marking/Remarking: DSCP, 802.1p
based on IEEE 802.1p bit support 8 priority levels or equivalent
based on TOS (IP Precedence/DSCP)
Packet Drop
Mirroring/Redirect to Port
Metering, Rate Limiting with 64Kbps unit
Rate Limit per subscriber
Rate Limit per service per subscriber
Peak Information Rate (PIR)
Sustained Information Rate (CIR)
8 queues per port
SPQ, DWRR, Hybrid (SPQ+DWRR)
Egress rate shaping per port/queue with 64Kbps unit |
|
Security Features |
Netbios, NBT filtering
DHCP filtering
Packet filtering with ACLs
Destination MAC address
Ether type VLAN ID
Destination/Source IP address
Enable/Disable data encryption upstream/downstream
Illegal Source MAC address block
ALL 0’s, 1’s, System Mac, Default G/W Mac
Illegal Source IP address block
Broadcast, DLF, Multicast packet rate control
Source MAC based excessive traffic Block
ONU/ONT auto discovery
Static Mac address
Mac filtering
Max Mac Number limit
Port based Self Loop Detect
IP anti-spoofing
ARP packet traffic limit
Blocking of user-to-user flows
Subscriber Isolation
MAC Address Anti Spoofing
ARP spoofing / ARP cache poisoning
IP spoofing
DHCP spoofing
Broadcast flooding
MAC address spoofing
MAC flooding
802.1Q tagging |
|
System Security Features |
RADIUS,
TACACS+
Telnet, SNMP with ACL
DHCP, 82/60 option DHCP, PPPoE(option105) and static IP
CPU Packet Filtering with ACL
CPU overload Packet traffic sender block
TCP sync attack protection with sync cookies
CPU packet rate-limit
Management packet priority control
Gratuitous ARP |
|
Management Features |
Telnet, SSH, SNMP v1/v2/v3
GUI Based Management through EMS
Remote OS Upgrade using TFTP, FTP
Dual Flash Image
Remote Configuration Data Download
NTP
Packet monitoring with TCPDUMP
RMON, Syslog
Type based Port, CPU Packet statistics | |
OLT U9264H-EPON
