P8124XG

P8124XG is an aggregation switch that accommodates L2 and L3 subscriber lines in Metro Ethernet network environment. As the latest version in ubiQuoss’ aggregation switch lineup Premier, 8124XG is designed to efficiently process high speed broadband traffic of various types of TPS applications. It has the form factor of box type which is also suitable for mounting onto a rack.

The most representative role of P8124XG is performing the reliable aggregation and distribution work. For this application P8124XG is typically installed at Telco’s Central Office, Apartment Complex MDF, or outdoor station to be interconnected in the Metro Access Network where it accommodate subscriber traffics through the 100Mbps links, process and transfer the traffics to the high speed backbone switch or router. It handles the traffic in reverse stream at the same time. Most of these processes are executed in wire speed.

For better spatial adaptability and easy installation, P8124XG has the benefit in terms of size which is the smallest of same kind products. In order to maximize the system reliability and service availability, P8124XG has adopted hardware-based distributed switching and modular Hot-Swapping features, which enables an operator to extend the system without cease of operation.

P8124XG can be applied to construct the best optimized network meeting the customer’s requirements quickly in cost effective manner, so that it helps operators to equip themselves with competitive advantages in terms of offering speed and price.

Routing and Multicasting

Ÿ   Routing protocols: Static route, RIP OSPFv2, BGPv4

Ÿ   Multicasting protocols: IGMP v1/v2, IGMP Snooping, PIM-SM

Bandwidth management and QoS

Ÿ   Hardware based bandwidth management per port

Ÿ   Priority based traffic process per packet (QoS)

Ÿ   Packet filtering (MAC filtering, NetBios filtering, DHCP filtering)

Ÿ   Rate Limiting and guarantee with megabit resolution

Ÿ   Hardware-based Rate Limiting (Traffic shaping)

Ÿ   Symmetric and Asymmetric Rate Limiting

Handy O&M

Ÿ   Cisco-like CLI, TFTP, Telnet, SNMP Ⅰ/Ⅱ agent, Sys log, RMON

Ÿ   EMS(Elementary Management System), Port Mirroring

Ÿ   DHCP Server & Relay

Performance

Ÿ   8.8Gbps Non-Blocking Switch Fabric

Ÿ   Maximum 6.5 Mpps L2/L3 Wire-Speed Switching/Routing Throughput

Ÿ   16K MAC Addresses for L2 switching

Ÿ   4K VLAN

Available Interfaces

Ÿ   Three (3) Slots for Interface modules

-       Optional module of 8 ports 10/100Base-TX (UTP)

-       Optional module of 8 ports 100Base-FX(MM/SM)

Ÿ   Giga Combo ports: Two (2) ports of 1000Base-X(SX/LX/LH) SFP / two(2) ports of 1000Base-Tx

Ÿ   Single core 100Base-FX module is also available

P8124XG Interface Type

Function and Feature

Ÿ   STP (IEEE 802.1d), RSTP(Rapid STP, Recovery within 5 seconds), PVST(Per vLAN STP)

Ÿ   Multi-VLAN(Overlapped VLAN)

Ÿ   Link Aggregation, Port trunking

Ÿ   Jumbo frame packet

Ÿ   DHCP Server/Relay

Ÿ   ACL (Access Control List)

Ÿ   Hot swapping function (FX/TX module, Power unit module)

Ÿ   NTP (Network Time Protocol)

Outstanding benefits

Ÿ   Stepwise augmentation by equipping interface module of 8port unit

Ÿ   Shutdown and blocking of the relevant spot rather than whole system when error occurs

Ÿ   Ceaseless operation even while changing network connections due to Hot Swapping function

Ÿ   Dual power units for better availability

Ÿ   Hardware based bandwidth management

-       Limitation and guarantee of the user bandwidth according to SLA (Service Level Agreement) by resolution of 1Mbps unit. (Recommendation on resolution: Up to 10M by unit of 1Mbps, Above 10M, Unit of 10M)

-       In addition to Symmetric bandwidth allocation, Asymmetric method is also completed, which is suitable for the typical traffic pattern of high speed internet access traffic as well as TPS ones.

Ÿ   IPv6 enabled (Software to be released additionally)

Hardware

Software