Ÿ  4FE Downlink Interface

Ÿ  Wireless LAN

Ÿ  NAT/NAPT

Ÿ  DHCP Function

Ÿ  Multicast Function

Ÿ  QoS Features

Ÿ  IPv4/IPv6 Compatibility

Network Features

Ÿ  Wire-speed WAN and LAN

Ÿ  Full-duplex Mode WAN and LAN

Ÿ  Auto MDI/MDIX (Medium Dependent Interface Cross) WAN and LAN

Ÿ  IEEE 802.1q VLAN(Tagged, untagged by port) for WAN port

Ÿ  Maximum 16 Active VLAN

Ÿ  VLAN ID range of 1~4094

Ÿ  4K MAC Address

Multicast Features

Ÿ  IGMPv2

Ÿ  IGMPv3

Ÿ  IGMP Snooping

Ÿ  IGMP Join/Leave Suppression

Ÿ  IGMP Fast Leave

Ÿ  IGMP Proxy

Ÿ  32 Multicast Group entry

DHCP Feature

Ÿ  DHCP Client

Ÿ  DHCP Server

Ÿ  In NAT mode, IP will be assigned from the IP Pool of the device, and in Bridge mode, the IP will be assigned from the DHCP server in the network

NAT/NAPT

Ÿ  Selectable between NAT mode and bridge mode

Ÿ  Dynamic/static private IP in NAT mode

Ÿ  Wire-speed for bi-directional packets of more than 256 Byte in NAT/NAPT.

Ÿ  Port Forwarding and DMZ Host function

Ÿ  Minimum 500 bi-directional concurrent sessions

QoS Feature

Ÿ  Rate limiting (±10%)

Ÿ  QoS for both upstream and downstream

Security

Ÿ  Broadcast storm control

Ÿ  MAC filtering

WiFi Features

Ÿ  IEEE 802.11b/g/n

Ÿ  Functional condition

Ÿ  Automatic Fallback

Ÿ  4-level adjustable channel Transmission Output

Ÿ  Manual or automatic selectable channel

Ÿ  Setting and changing of number of CPEs that can access at one time.

Ÿ  Mixed use of 802.11b, 802.11g, 802.11n

Ÿ  Encryption (Keys such as Hex, ASCII, special character should be supported).

Ÿ  64/128bit Static WEP Key

Ÿ  WPA

Ÿ  WPA2

Ÿ  WPA-PSK

Ÿ  WPA-PSK2(Option)

Ÿ  4 or more Virtual AP (Multi SSID), and each SSID supports different encryption.

Ÿ  SSID should support alphabet, numeric, special character

Ÿ  Hidden SSID

Ÿ  Wireless LAN QoS function: IEEE 802.11e(WMM)

Ÿ  Traffic classification by 802.1p and DSCP field value

Ÿ  IEEE 802.1x

Ÿ  EAP MD5/EAP TTLS

Ÿ  PEAP

Ÿ  RADIUS Client function

Ÿ  TR-069

Ÿ  Session Timeout function.

Ÿ  Upon re-authentication due to Session Timeout, it should be managed by the same Session ID.

Ÿ  Idle Timeout

Ÿ  Session Timeout value and Idle Timeout value shall be obtained from Authentication system.

Ÿ  Web Redirection upon authentication failure

Ÿ  Session termination upon wirelss link down

Ÿ  Account termination transmission function

Operating & Management

Ÿ  OAM

Ÿ  System or module LED.

Ÿ  SNMP v1, v2 MIB.

Ÿ  Memory structure that allows to save or modify Configuration File

Ÿ  Memory should keep the contents of the memory even when power supply is stopped.

Ÿ  Local and remote Firmware Upgrade(The existing Image should be kept when upgrade fails).

Ÿ  Normal session for system management even when CPU overload

Ÿ  Remote Management

Ÿ  Remote access through Telnet(RFC 854, 855)

Ÿ  CPE Management Server

Ÿ  Device Reset

Ÿ  LAN port reset

Ÿ  Setting and changing Config

Ÿ  Firmware download Only through Web Server by TR069

Ÿ  VLAN ID change

Ÿ  MAC Filtering

Ÿ  Time sync through NTP Server

Ÿ  Device status and performance management

Interface Configuration